This Spill Ready IBC Spill Containment Pallet delivers deep secondary containment for 1 IBC tote. It measures 53.15" L × 53.15" W × 35.43" H. The basin holds approximately 1,300 L (≈340 gal), giving a strong safety margin for catastrophic tote or drum failures under EPA/SPCC programs.
Molded from heavy-duty HDPE, it resists chemicals, UV and weather for indoor or outdoor use, and the bright yellow finish clearly identifies the containment zone. Use it beneath bulk chemical totes, wastewater tanks and large containers where maximum spill protection matters.
Key Benefits
Holds 1 IBC tote — 53.15" L × 53.15" W × 35.43" H footprint.
1,300 L (≈340 gal) containment — deep basin exceeds the safety margin for a full IBC.
Heavy-duty HDPE — resists chemicals, UV and weather for indoor or outdoor use.
Forklift-handleable, safety yellow — reposition as needed; clearly marks the containment area.
≈3,000 kg static — supports fully loaded totes.
Product Features
Container capacity: 1 IBC tote
Dimensions: 53.15" L × 53.15" W × 35.43" H
Sump capacity: 1,300 L (≈340 gal)
Material: HDPE
Color: Yellow
Handling: Forklift-compatible (per site SOP)
Static load: ≈3,000 kg static
Applications
Bulk chemical tote storage
Wastewater and waste collection tanks
Drum group containment
Outdoor bulk storage
SPCC/EPA secondary containment
Industries Served
Chemical processing & storage
Manufacturing plants
Warehousing & 3PL
Oil, fuel & lubricant handling
Hazardous waste & environmental services
Agriculture & food processing
Specifications
Type
IBC spill containment pallet
Container capacity
1 IBC tote
Dimensions
53.15" L × 53.15" W × 35.43" H
Sump capacity
1,300 L (≈340 gal)
Static load
≈3,000 kg static
Material
HDPE
Color
Yellow
Handling
Forklift-compatible
SKU
SDP-IBC53
Why Choose Spill Ready Supplies
IBC Spill Containment Pallet - 53" x 53" x 35" with 340 Gallon Sump, HDPE Tote Containment, Yellow is backed by Spill Ready Supplies — a specialist in industrial spill control:
Specialist spill-control supplier — absorbents, containment, floor safety and heating in one catalog, so you can standardize purchasing across sites.
Ships fast from Solon, Ohio for dependable lead times and lower freight for Midwest and nationwide facilities.
Spec-accurate product data and responsive support to help you match the right product to the fluid, volume and environment.
Volume and multi-pack pricing available for maintenance budgets, spill-kit programs and multi-location rollouts.
Frequently Asked Questions
Will this contain a full IBC tote?
The deep basin is engineered to capture catastrophic IBC or drum leaks; for compliance, confirm that capacity meets the volume requirement in your spill prevention plan.
Indoor or outdoor use?
HDPE resists UV, weather and chemicals, so it suits indoor or outdoor placement.
Can it hold drums instead of an IBC?
Yes — the large footprint can accept multiple drums; verify safe loading against your site SOP.
Order IBC Spill Containment Pallet - 53" x 53" x 35" with 340 Gallon Sump, HDPE Tote Containment, Yellow from Spill Ready Supplies today. Need bulk pricing, freight quotes, or help matching the right spec to your facility? Contact our team at info@spillreadysupplies.com — we ship industrial spill control nationwide from Solon, Ohio.
Specifications
Brand
Spill Ready Supplies
Mfr Part #
SCP-D4-1300
Product Dimensions (L x W x H)
53" L x 53" W x 35" H
Product Weight
160.9 lbs
Shipping Weight
220 lbs
Material
Polyethylene
Composition
Sump: Polyethylene (LDPE) and Grate: Polyethylene (HDPE)
Overall dimensions: 53" L x 53" W x 35" HDeep sump captures a full IBC or drum-group failureCenter the IBC tote on the grate for even load distributionFour-way fork pockets — movable when properly loaded/secured
Compare
Why Buy This Instead of a Cheap Alternative
Not every option in this category is built the same. Here's how this one stacks up.
Comparison of IBC Spill Containment Pallet 340 Gal Sump | HDPE Tote Containment Pallet for 275/330 Gallon IBC Totes | EPA against typical low-cost alternatives
Feature
This Product (SDP-IBC53)
Typical Cheap Alternative
Sump Capacity
1,300 L (~340 gal)
Often 66–110 gal — undersized for a full IBC
Material
Heavy-duty HDPE grate / LDPE sump
Thin-wall polyethylene or recycled regrind
Static Load Capacity
6,600 lbs
Frequently unrated or under 3,000 lbs
Chemical Resistance
Resists a broad range of industrial chemicals
Limited published chemical compatibility data
UV Resistance
UV-stabilized for outdoor use
Often indoor-only; degrades and yellows outdoors
Compliance Support
Sized to help support EPA/SPCC secondary containment planning*
Capacity rarely documented against SPCC sizing rules
Durability
One-piece molded construction — no weld seams to fail
Seamed or multi-piece assembly prone to leak points
Expected Service Life
Years of outdoor duty with proper care
Shorter lifespan under UV/chemical exposure
Maintenance
Integrated drain simplifies routine upkeep
No drain — manual pump-out or tipping required
Support
Backed by Spill Ready Supplies spec-accurate data & support
Limited or no manufacturer support
*Compliance-support language, not a certification claim — see the Compliance section below.
Compliance & Applications
Built to Help Support Your Compliance Program
EPA / SPCC / OSHA
Sized to help support EPA Spill Prevention, Control, and Countermeasure (SPCC) secondary containment planning — confirm the exact volume requirement in your facility's written SPCC plan.
The 1,300 L (~340 gal) sump is designed to help meet secondary containment capacity guidance for a single IBC tote; final compliance determination is the responsibility of your site's EHS/compliance team.
Heavy-duty, one-piece HDPE/LDPE construction supports OSHA workplace housekeeping and spill-containment practices around bulk liquid storage.
This listing does not claim independent third-party certification. If your program requires certified test documentation, contact our team for current spec sheets before ordering.
Who Needs This
Chemical Processing & Storage
Manufacturing Plants
Oil, Fuel & Lubricant Handling
Food & Beverage Processing
Warehousing & 3PL
Automotive & Fleet Maintenance
Laboratories
Water & Wastewater Treatment
Agriculture
FAQ
Frequently Asked Questions
22 answers pulled straight from our spec sheet and support team.
Yes. The 53.15" L x 53.15" W platform is sized for a standard 275–330 gallon IBC tote footprint.
Yes. The HDPE/LDPE construction is UV- and weather-resistant, so it is rated for outdoor as well as indoor placement.
The polyethylene construction resists a broad range of industrial chemicals. Compatibility varies by concentration and temperature, so confirm compatibility with your specific fluid before use.
Yes. A built-in drain lets you remove accumulated rainwater or minor leaks without lifting or moving the IBC.
Yes. It has four-way fork access and can be moved while loaded, provided drums/totes are properly secured per your site SOP.
No. It ships as a single molded unit — no assembly required.
Contact our team at info@spillreadysupplies.com for current manufacturer warranty terms on this SKU; we're happy to send documentation before you order.
This item ships via freight carrier due to its size and weight (~220 lb shipping weight). A commercial address with dock or forklift access is preferred; liftgate service is available for non-dock addresses.
Rinse with water and a mild detergent; avoid abrasive cleaners that could damage the UV coating. For chemical residue, follow your facility's decontamination procedure and the fluid's SDS.
Unused items in original condition can be returned within our standard return window — email info@spillreadysupplies.com to start a return; Easy returns are availabel with no questions asked.
Yes. Volume pricing is available for multi-unit and multi-location orders — use the Request a Bulk Quote section on this page or email our team.
Yes, we accept POs from qualified government, municipal and institutional buyers — contact our team to set up net terms.
Yes. The large footprint can accept multiple drums; verify safe loading configuration against your site SOP.
6,600 lbs static load — sufficient to support a fully loaded IBC tote.
The unit is stackable when empty for compact storage. Do not stack loaded units.
Safety yellow, so the containment zone is clearly identified on the plant floor per common visual-safety practice.
Approximately 1,300 liters, or about 340 gallons.
The unit weighs approximately 160.9 lbs; shipping weight with packaging is approximately 220 lbs.
Per the manufacturer data on file, this SKU is not rated for flammable-liquid storage — contact us for flammable-rated containment options.
In-stock units typically ship within 1–2 business days from our Solon, Ohio warehouse; freight transit time varies by destination.
Yes — use the Download PDF Datasheet button on this page to generate an up-to-date spec sheet with dimensions, weight and technical data.
The molded containment pallet with integrated grate and drain. IBC totes, drums and fittings are sold separately.
